PRODUCT

Anticorrosion technology, Green anticorrosion

Product Categories

All categories
 产品分类

Rust conversion agent

The company developed the XZ-1 type rust conversion agent by the liquid (A component ) and black powder (B component ), with the preparation of the steel surface coated with a rust can react with rust layer formed on the surface of a steel attachment are tight , hard black conversion coating , this layer of film is exposed to 10 to 15 days and not return to rust in a dry atmosphere , avoiding the sand-blasting rust easily back problems , while conversion coatings with various anti-corrosion coatings and synthetic resin has good adhesion , suitable for a variety of coatings , rubber lining and synthetic resin binder of anti-corrosion lining works.
Quantity
-
+
Stock:
1
Product description

The company developed the XZ-1 type rust conversion agent by the liquid (A component ) and black powder (B component ), with the preparation of the steel surface coated with a rust can react with rust layer formed on the surface of a steel attachment are tight , hard black conversion coating , this layer of film is exposed to 10 to 15 days and not return to rust in a dry atmosphere , avoiding the sand-blasting rust easily back problems , while conversion coatings with various anti-corrosion coatings and synthetic resin has good adhesion , suitable for a variety of coatings , rubber lining and synthetic resin binder of anti-corrosion lining works.

Feature

( 1 ) construction speed, high efficiency

Use stainless steel surface cleaning agent transformation without special equipment, brush, roller , injection coating, sandblasting equipment needed to save the transportation , maintenance and transportation of sand , baking sand, sieve sand , loading sand, recycled sand , etc. processes, a significant reduction in the auxiliary work , the labor intensity is greatly reduced, thus shortening the construction period , more than six times to improve efficiency .

( 2 ) conversion speed

Usually 2 to 3 hours (5 ℃) surface can be transformed after construction is completed, can be covered with other anti-corrosion layer construction on its surface.

( 3 ) good quality surface cleaning

Use stainless steel rust conversion agent for the conversion of available hard surface were firmly bonded with the substrate conversion layer , and porous membrane layer into which increases the bonding strength of surface coating and converting film to clean up the effects and sandblasting similar. Meanwhile rust converter that rust good permeability can be obtained compared with the steel slit completely transformed avoid inadequate in this respect blast .

( 4 ) may be applied to damp surfaces

The rust converter can be used to wet the steel surface , but the surface water after construction may not .

( 5 ) does not pollute the environment

The rust conversion agent for the aqueous material , directly applied to the steel surface to avoid blasting silica dust pollution caused by the operator and the environment are beneficial.

( 6 ) significant economic benefits

Direct cost of using stainless steel surface cleaning transforming agent about blast cleaning of 1/ 8 to 1/ 10 , coupled with shorter duration, the indirect benefits of improved efficiency brought about by its very substantial economic benefits .

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table
Previous
Next

Nanjing AnTie anticorrosion technology Co., Ltd

ADD: No. 625, geguan Road, Nanjing Chemical Industry Park, Room 1206, Zhongshan Science and Technology Pioneer Park, Chinese Academy of Sciences

SERVICE

TEL: +86-25-58398490

FAX: +86-25-5701123

E-mail: njac_js@163.com

MESSAGE

If you are interested in our products, please use the online direct form!

Copyright © 2019 Nanjing AnTie anticorrosion technology Co., Ltd    苏ICP备14000581号-1    Powered by www.300.cn